 |
|
When the work is very low frequency (in the human auditory range) will produce noise. When frequency 20kHz below, noise, and may not be very big
Beyond the occupational safety and health or other regulations stipulated in the safety of noise. In need of high power, remove dirt instead of considering the workpiece surface damage
Application, usually choose to 30kHz 20kHz from within the scope of the low frequency. This frequency range of frequency is often used to clean large and heavy
Parts of the workpiece materials or high density. KAMSON provide 28KHz piezoelectric transducers, 40KHz and etc.
|
Cavitation Strength Relative to 40 kHz |
|
|
High frequency is usually used for cleaning smaller precision parts, or remove tiny particles. High frequency is also used to was not allowed the workpiece surface damage. use
Hf can improve cleaning performance from several aspects. With increased frequency of bubble, cavitation in linear increase, and more intensive force
It can enter into smaller aperture. If power remain unchanged, cavitation bubble decrescent, its release energy decreases accordingly, so effectively reduced the workpiece
Surface damage. Another advantage of high frequency decreases the viscous layer (effect), poisson nouri ultrasonic can 'found' tiny particles.
This is similar to YuXiaoXi level of the enterprise can see the small stones.
|
|
KAMSON provide a series of high, medium and low frequency of ultrasonic cleaning equipment, there is 28 kHz, 40kHz and 80kHz, 100 kHz and 130kHz higher. cleaning
The smallest particle, can choose high frequency equipment.
 |
 |
 |
 |
 |
