The ultrasonic cleaning machine maintenance and matters needing attention
2009-11-19 9:10:52
1 and power: the use of the power equipment specifications and operators, and power supply circuit in the user must furnish dedicated to the air cleaner in need of switch power supply, open when cleaning Our company produce the complexities of power specifications have the following kinds: 1 ￠220 ± 1 10VAC50/60HZ, single-phase 5 ~ 15 years three feet, contains a round plug grounding, 2 3 ￠380 ± 10V50HZ, adopts three-phase four-wire system directly, five core qualifying double insulated cables, contains a grounding wire, 3 the irrelevant power users with diameter is equal to or greater than necessary cleaning JiYin/diameter, 2 and grounding: our company produce cleaner in the body and generator power connection with special grounding in Ming dynasty, and in other wires between the features, because this equipment and water resistance, brasion resistance (level), easy cause leakage, please click security for good grounding, 3, equipment used, flammability wash not using inflammable and explosive substances, equipment for wash away the use in flammable explosive materials is necessary to ensure quality, customer special circumstances when necessary, by certain substances must confirm corresponding security and safety measures, 4, wash tank of liquid or inadequate level is to cause irreversible damage equipment, when using, must ensure that in full amount washed into liquid, or relevant electric heater, pump, shock wave son could damage and may lead over the fire and personal injury, 5 and electric control boxes and related electrical components such as attention not to splash into the water, and stay away from the steam, corrosive gas, dust, etc. 6 please timely abnormal, equipment and contact or stop by experienced after power professional electrician inspections, Seven, to clean the workpiece with the feet, please wash basket or hanging fixture, hang installed slot abluent, prohibit the workpiece on directly into the bottom of the channel, or it may cause a wash of workpiece and damage, 8, equipment operation, the possible high-temperature and high-pressure, electrical components terminals, transmission mechanism of surface charged movement, the pressure on May cause axons, work injury factor when opening the cabinet, in order to avoid do homework without protective conditions, 9, equipment, please don't emit long liquid, dry clean inside surface with film after slot and protect the equipment, in order to prevent corrosion aging faster, The daily maintenance and maintenance 1 and keep equipment in the workplace, dry, clean and ventilated for equipment operation and long-term effective working conditions; the optimal 2, washing liquid too dirty, should be timely handling the cleaning trough regular cleaning, liquid trough dirt, maintain clean and unclean slots can improve the appearance, wash tank durability, 3, electric control cabinet and equipment from steam vents, corrosive gas, dust, regular use compressed air cleaning the dust attached, 4 and regular testing equipment, the insulation resistance for aging electrical components regular check, inspection, ensure machinery is in proper grounding grounding the project must have experienced by the electrician,, 5 and regular testing power, voltage in equipment, avoid too high or too low in the unstable power under long-term work, 6, with filter equipment, replacing filter; regularly. 7, with transmission mechanism, should periodically grease, oil, change regularly as lubricants, ensure reducer gear oil lubrication in good operation under the working conditions, Fault and countermeasures Fault and abnormal condition and treatment method 1, ultrasound power, insurance, the contrast in June and July 2, no electrical heating power, check whether set in normal temperature controller, check the water related, whether the switch; Replace component invalidation, 3, shell charged electric component insulation bad or other components connect circuits, replace shell, good insulation undesirable components grounding, 4 and abnormal voice, clean effect is reduced ultrasonic generator or transducer, abnormal transducer fuses two terminals of insulation resistance, and tear down to guard board transducer, 5, screaming voice cannot adapt to block and transducer parts of water level, water temperature, water level, and change the workpiece when not too big, 6 and insurance tube, burning glass tube voltage, no black examination may be high load voltage instantaneous changes, or change the same number of insurance of insurance of tube or older, 7, insurance, the glass tube tube burned by dark over-current, may be internal power tube or loop circuit
